KERATHERM^® Thermal conductive tapes

Thermal conductive tapes have a smooth surface in order to ensure that there is no entrapped air that would interfere the heat transfer between the component and the heat sink. The material compensates microscopic irregularities on the contact surfaces, which improves the thermal interface and therefore increases the heat dissipation.

The highly thermal conductive white group, with its well-balanced thermal, electrical and dielectric behaviour as well as its very good self-adhesion characteristics, is created by filling a silicone elastomer base with aluminum oxide. An increase in mechanical strength can be achieved through fibre glass reinforcement. This film type can optionally be supplied with an additional adhesive coating.

Optional

• 86/30 KERATHERM^®: base foil
• 86/10 KERATHERM^®: base foil 86/30 with fibre glass
• 86/20 KERATHERM^®: base foil 86/30 with fibre glass and adhesive coating 
• 86/40 KERATHERM^®: base foil 86/30 with adhesive coating

This silicone elastomer film is characterized by its excellent electrical values. It exhibits good thermal behaviour. Optional fibre glass reinforcement leads to very good mechanical properties. These film types possess excellent mechanical stability along with good perforation strength. Due to its structure, Keratherm green is extremely self-adhesive.
Additional adhesive coatings available.

Optional

• 86/37 KERATHERM^®: base foil
• 86/17 KERATHERM^®: base foil 86/37 with fibre glass
• 86/27 KERATHERM^®: base foil 86/37 with fibre glass and adhesive coating 
• 86/47 KERATHERM^®: base foil 86/37 with adhesive coating

KERATHERM rose offers a good heat conduction due to a special filled silicone elastomer. That’s why the electrical insulation is stable. On request, these foils can also be delivered reinforced with fibre glass as well as with adhesive coating. The excellent thermal resistance of this foil leads to an optimum heat transfer to the heat sink.

Optional

• 86/50 KERATHERM^®: base foil
• 86/51 KERATHERM^®: base foil 86/50 with single-sided adhesive coating
• 86/52 KERATHERM^®: base foil 86/50 with fibre glass 
• 86/53 KERATHERM^®: base foil 86/50 with fibre glass and adhesive coating

Keratherm 86/60 offers outstanding thermal conductivity, which is achieved by a specially filled silicone elastomer. The excellent electrical insulation properties are thereby retained. The excellent thermal resistance of this foil leads to a optimum heat transfer to the heat sink.

Optional

• On request availble with adhesive coating

This film is especially suitable for highpower applications. It has excellent thermal and electrical properties. Thanks to its good performance, Keratherm red can be used reliably in densely packed electronic applications.

Optional

• On request availble with adhesive coating

Keratherm brown is an excellent choice for cost-effective solutions due to its good thermal properties. These fibre glass reinforced films show a high insulation capacity as well as a good cut-through resistance due to their structure.

Optional

• 70/50 KERATHERM^®: base foil with fibre glass
• 70/60 KERATHERM^®: base foil 70/50 with fibre glass and adhesive coating

You Get:

• News and trends around Thermal Management
• Information to new products (Thermal Interface Materials)
• Invitations to exhibitions and lectures

Do you have any questions, requests or suggestions? How can we help you?