KERATHERM® Product Overview

Standard films

Standard films have a smooth surface in order to ensure that there is no entrapped air that would interfere the heat transfer between the component and the heat sink. The material compensates microscopic irregularities on the contact surfaces, which improves the thermal interface and therefore increases the heat dissipation.
[Opens internal link in current windowmore information]

Standard films silicone-free

Silicone free standard films are used wherever the use of silicone can lead to problems. Besides excellent thermal and electrical properties, these films are characterized by their good cut-through resistance.
[Opens internal link in current windowmore information]

Thermal grease

Thermal greases are especially characterized by its good plasticity and its very low thermal resistance. There is no drying out or leaking of the silicone components.
[Opens internal link in current windowmore information]

Phase-Change-Material

Phase-Change-Material is produced on the base of phase changing properties. These films compensate even the smallest irregularities between power module and heat sink, thereby optimizing the contact between the surfaces and increasing the heat transfer.
[Opens internal link in current windowmore information]

Softtherm films

Softtherm films are the ideal material for compensating even large component irregularities. Thanks to its excellent compressibility, they realize an optimum thermal contact combined with electrical insulation. Supplied thicknesses from 0.5 - 5.0 mm. Other thicknesses or shapes are available on request.
[Opens internal link in current windowmore information]

Softtherm films silicon-free

Softtherm films are the ideal material for compensating even large component irregularities. Thanks to its excellent compressibility, they realize an optimum thermal contact combined with electrical insulation. Supplied thicknesses from 0.5 - 5.0 mm. Other thicknesses or shapes are available on request.
[Opens internal link in current windowmore information]

Thermal compounds

Thermal compounds can be well used for encapsulating whole applications and for dispensing housing lids or heat sinks. Thanks to its easy handling, it allows even the most complicated geometries to be encapsulated.
[Opens internal link in current windowmore information]

Graphite films

Graphite films are based on 100% pure graphite. The films are available as uncoated types or with filled adhesive or standard adhesives for specific applications.
[Opens internal link in current windowmore information]

Ferrite film

The soft Ferrite Film F 96 is especially suitable for electromagnetic shieldings, flexible coils or other magnetic applications due to its magnetic properties.
[Opens internal link in current windowmore information]

Adhesive films

The Adhesive Films KL 90 und KL 91 are thermoconducting, electrically isolating, double sided adhesive films. They have an excellent, permanent adhesive strength with high thermal conductivity at excellent insulation at the same time.
[Opens internal link in current windowmore information]

Adhesive coating

Each film type requires its own special adhesive system. Next to soft elastic adhesives with lower adhesive strength, Kerafol offers also adhesives with high adhesive strength, or with different fillings for an improved heat transfer.
[Opens internal link in current windowmore information]

Special products

As a specialist in producing ceramic films, we offer you the development of films from your raw materials and production services from labscale to mass production.
Special products include KERATHERM® Spaceform and KERATHERM® Gluey-Soft.[Opens internal link in current windowmore information]

Subscribe to the WLF-Newsletter and become an insider!

You Get:

  • News and trends around Thermal Management
  • Information to new products (Thermal Interface Materials)
  • Invitations to exhibitions and lectures

Contact

Do you have any questions, requests or suggestions? How can we help you?

Michael Sertl
Product manager thermal management

Telefon: +49 (0)9645 88 500
Fax: +49 (0)9645 88 390
E-Mail: keratherm(at)kerafol.com

Download vCard

Quick Contact

I ask for:

By setting the hook you agree, that the data you enter will be collected and stored electronically. You can revoke this consent at any time with a message to us. For more information, see the privacy statement.