KERATHERM® Standard films

Standard films have a smooth surface in order to ensure that there is no entrapped air that would interfere the heat transfer between the component and the heat sink. The material compensates microscopic irregularities on the contact surfaces, which improves the thermal interface and therefore increases the heat dissipation.

Properites

  • good insulation properites
  • heat-conductive
  • good compressibility
  • fully crosslinked
  • flexible
  • environmental friendly
  • RoHS conforme
 

Applications

  • power supplies
  • automotive, engine controllers
  • LCD displays
  • white goods
  • audio and video components
  • power converters
 

Benefits

  • smooth surface
  • very good properties even at very low contact pressure
  • low hardness
  • high self-adhesion without adhesive coating
  • UL listed

Film Options

  • single-sided adhesive surface
  • single-sided adhesive coating possible
  • can be supplied on sheets or as already punched goods
 

86/30
KERATHERM® white

The highly thermal conductive white group, with its well-balanced thermal, electrical and dielectric behaviour as well as its very good self-adhesion characteristics, is created by filling a silicone elastomer base with aluminum oxide. An increase in mechanical strength can be achieved through fibre glass reinforcement. This film type can optionally be supplied with an additional adhesive coating.

Optional
  • 86/30 KERATHERM®: base foil
  • 86/10 KERATHERM®: base foil 86/30 with fibre glass
  • 86/20 KERATHERM®: base foil 86/30 with fibre glass and adhesive coating
  • 86/40 KERATHERM®: base foil 86/30 with adhesive coating
Applications
  • power supplies                   
  • audio and video components
  • white goods
  • power converters (AC-DC, DC-DC)
  • engine controllers

86/37
KERATHERM® green

This silicone elastomer film is characterized by its excellent electrical values. It exhibits good thermal behaviour. Optional fibre glass reinforcement leads to very good mechanical properties. These film types possess excellent mechanical stability along with good perforation strength. Due to its structure, Keratherm green is extremely self-adhesive.
Additional adhesive coatings available.

Optional
  • 86/37 KERATHERM®: base foil
  • 86/17 KERATHERM®: base foil 86/37 with fibre glass
  • 86/27 KERATHERM®: base foil 86/37 with fibre glass and adhesive coating
  • 86/47 KERATHERM®: base foil 86/37 with adhesive coating
Applications
  • automotives
  • telecommunication units
  • high voltage units
  • DC-DC converters

86/50
KERATHERM® pink

KERATHERM rose offers a good heat conduction due to a special filled silicone elastomer. That’s why the electrical insulation is stable. On request, these foils can also be delivered reinforced with fibre glass as well as with adhesive coating. The excellent thermal resistance of this foil leads to an optimum heat transfer to the heat sink.

Optional
  • 86/50 KERATHERM®: base foil
  • 86/51 KERATHERM®: base foil 86/37 with single-sided adhesive coating
  • 86/52 KERATHERM®: base foil 86/37 with fibre glass
  • 86/53 KERATHERM®: base foil 86/37 with fibre glass and adhesive coating
Applications
  • automotives
  • audio and video components
  • white goods
  • power converters (AC-DC, DC-DC)
  • engine controllers
  • LCD displays

86/60
KERATHERM® pink

Keratherm 86/60 offers outstanding thermal conductivity, which is achieved by a specially filled silicone elastomer. The excellent electrical insulation properties are thereby retained. The excellent thermal resistance of this foil leads to a optimum heat transfer to the heat sink.

Optional
  • On request availble with adhesive coating

 

 

 

Applications
  • automotives
  • audio and video components
  • white goods
  • power converters (AC-DC, DC-DC)
  • engine controllers
  • LCD displays

86/82
KERATHERM® red

This film is especially suitable for highpower applications. It has excellent thermal and electrical properties. Thanks to its good performance, Keratherm red can be used reliably in densely packed electronic applications.

Optional
  • On request availble with adhesive coating

 

 

 

Applications
  • “high end“ solution
  • controll boards
  • BGA applications
  • hard-disc-drives

70/50
KERATHERM® brown

Keratherm brown is an excellent choice for cost-effective solutions due to its good thermal properties. These fibre glass reinforced films show a high insulation capacity as well as a good cut-through resistance due to their structure.

Optional
  • 70/50 KERATHERM®: base foil with fibre glass
  • 70/60 KERATHERM®: base foil 70/50 with fibre glass and adhesive coating
Applications
  • automotives
  • engine controllers
  • LCD displays
  • power converters (AC-DC, DC-DC)
  • audio and video components
  • white goods

Contact

Do you have any questions, requests or suggestions? How can we help you?
Fill out the contact form and we will contact you immediately!
Michael Sertl
Product manager thermal magement
Phone+49 (0)9645 88 500
Fax+49 (0)9645 88 390

Quick Contact

a